- 100% recycled rubber can withstand a lifetime of indoor and outdoor use.
- Easy to clean, anti-slip surface for safety and convenience.
- Comes with a hassle-free, lifetime manufacturer's warranty.
- All Rampit USA Rubber Threshold Ramps are ADA Compliant and Made in America.
-
Rampit USA rubber threshold ramps provide safe and easy access to areas with a rise of up to two inches and can withstand weights up to 1,000 lbs. -
90-degree corners are used to create right angles in handrails. All 90-degree corner pieces are sold individually and include an aluminum insert pre-installed on each end. To create handrail corners that are more or less than 90 degrees, please see plastic knuckles. -
Square ends are used to enclose and terminate the end of a handrail when space may be an issue. Square ends are sold individually and include pre-installed aluminum inserts (not pictured). Rampit USA recommends using ANSI loops whenever space allows. -
Handrail posts are the main components in all Rampit USA handrails and attach directly to the ramp or platform stringer using the hardware provided in a small bolt pack. Handrail posts are sold individually. -
Ramp handrails are sold as a set and specifically designed to fit Rampit USA Independence Series Ramps. Ramp handrails are actual size measured from end to end. Each handrail (2 per set) includes two handrail posts and two filler tubes for lengths 4' - 8' or three handrail posts and four filler tubes for lengths 9' and 10' only. Ramp Handrails include a small bolt pack for installation. Square ends, ANSI Loops, Knuckles, Corners, Caps, and inserts needed for terminating or changing handrail direction are all sold separately. -
All Rampit USA ramps are attached to platforms using aluminum adapters attached to the ramp’s stringers. These adapters are reversible and can be used for ramps that go up or down. Each adapter pack includes two sets of adapters and hardware:- (2) Aluminum Adapters
- (2) Angle Brackets
- (6) 1" x 5/16" Carriage Bolts
- (6) 5/16" Washers
- (6) 5/16" Hex Nuts
- (2) 1/4" x 1/2" Self-Tapping Screws
-
The self-adjusting bevel is installed at the start of every Rampit USA ramp and ensures a smooth transition on or off the ramp. -
Stringers are shaped like an upside-down letter "F" and enclose all Rampit USA ramps and platforms. On platforms, two of the four stringers are usually flipped upside-down to create a smooth transition on and off the platform. Platform stringers are cut at 45-degree angles, whereas ramp stringers are cut at 90-degree angles. Stringers are sold individually and cut to the length specified. For a matching set, please add two of the same size to your cart. -
Large bolt packs contain enough hardware for installing six handrail posts:- (12) 1" x 5/16" Carriage Bolts
- (6) 2" x 5/16" Carriage Bolts
- (18) 5/16" Washers
- (18) 5/16" Hex Nuts
-
Rampit USA Empower Series™ Aluminum Butt Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Butt Ramp includes two legs that allow the ramp to “butt up” to a raised surface or doorway without interfering with an inward or outward swinging door.- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- Included legs allow the ramp to “butt up” to a raised surface or doorway
- Will not interfere with inward or outward swinging doors
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
Rampit USA Empower Series™ Aluminum Curb Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Curb Ramp includes a built-in adapter that hangs off the end of the ramp, enabling the ramp to rest on a door threshold or raised surface. Please note: a Curb Ramp is generally not compatible with an outward swinging door. For ramps that are compatible with outward swinging doors, please see Rampit USA Empower Series™ Aluminum Butt Ramps.- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- The included adapter allows the ramp to rest on a raised surface or doorway
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
Crossarms are available in two different widths and include two crossarm clamps and two leg clamps. Crossarms do not include legs. For a complete assembly including legs, please see support assembly.