-
Ramp handrails are sold as a set and only include hardware for installation. Square ends, ANSI Loops, Knuckles, Corners, Caps, and inserts needed for terminating or changing handrail direction are all sold separately. -
All Rampit USA ramps are attached to platforms using aluminum adapters attached to the ramp’s stringers. These adapters are reversible and can be used for ramps that go up or down. Each adapter pack includes two sets of adapters and hardware:- (2) Aluminum Adapters
- (2) Angle Brackets
- (6) 1" x 5/16" Carriage Bolts
- (6) 5/16" Washers
- (6) 5/16" Hex Nuts
- (2) 1/4" x 1/2" Self-Tapping Screws
-
Crossarms are available in two different widths and include two crossarm clamps and two leg clamps. Crossarms do not include legs. For a complete assembly including legs, please see support assembly. -
ANSI loops are the rounded ends of Rampit USA handrails. ANSI loops include pre-installed aluminum inserts (not pictured) and can be flipped to angle upwards or downwards. -
Handrail posts are the main components in all Rampit USA handrails and attach directly to the ramp or platform stringer using the hardware provided in a small bolt pack. Handrail posts are sold individually. -
Rampit USA Empower Series™ Aluminum Butt Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Butt Ramp includes two legs that allow the ramp to “butt up” to a raised surface or doorway without interfering with an inward or outward swinging door.- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- Included legs allow the ramp to “butt up” to a raised surface or doorway
- Will not interfere with inward or outward swinging doors
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
Rampit USA Empower Series™ Aluminum Curb Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Curb Ramp includes a built-in adapter that hangs off the end of the ramp, enabling the ramp to rest on a door threshold or raised surface. Please note: a Curb Ramp is generally not compatible with an outward swinging door. For ramps that are compatible with outward swinging doors, please see Rampit USA Empower Series™ Aluminum Butt Ramps.- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- The included adapter allows the ramp to rest on a raised surface or doorway
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
The self-adjusting bevel is installed at the start of every Rampit USA ramp and ensures a smooth transition on or off the ramp. -
A support assembly is made up of a crossarm, including two leg clamps and two crossarm clamps, and two complete legs. Support assemblies are installed underneath a ramp and are used to connect two individual ramp sections.
-
The built-in adapter is an optional replacement for the uppermost piece of tread in a ramp section. The built-in adapter extends out beyond the end of the ramp, enabling the ramp to rest on the raised surface. Please select the length built-in adapter that best corresponds to the width of your ramp. -
Square ends are used to enclose and terminate the end of a handrail when space may be an issue. Square ends are sold individually and include pre-installed aluminum inserts (not pictured). Rampit USA recommends using ANSI loops whenever space allows. -
All Rampit USA aluminum ramps and platforms are assembled using a series of inter-connected pieces of light, and/or heavy tread. All tread pieces are six inches in length and can be cut to any width necessary. Light tread is standard on all residential platforms and portable ramps.